Giasco Herzt boots

70,00 $

Low-top shoes, suede leather, 1.8-2.0mm thick. With 3D exterior fabric, breathable and abrasion-resistant, with embedded reflective fabric. Soft tongue covered and cushioned. Footwear with no metallic parts.

Description

Characteristics

    • Toecap Composite up to 200J toecap made of athermal polymers EN 12568.
    • Anti-puncture insole with Composite insulating fabric, flexible EN 12568
    • Isolating Hard Rock sole made of double density polyurethane and insulating rubber, hydrolysis, hydrocarbons, and abrasion-resistant ISO 5423:92, anti-shock, and SCR anti-slip.
    • The lower part of the shoe offers electric isolation (to some extent: without humidity, it’s not referred to the upper part of the shoe) against up to 1000V- M Ω > 1.000 tensions
    • Electric resistance Canadian Norm CSA Z195 14 increment 1 kV/sec voltage 20.000V /60 hz – duration 1 minute.
    • Electric resistance ASTM F2413 11 increment 1 kV/sec voltage 20000 V/60 Hz – duration 1 minute.
    • Lower power flow requirement of 1.0 mA.
    • Dielectric insole, removable, anatomic, absorbent, isolating y FO breathable. E Hydrocarbon-resistant sole, energy absorption on the heel P area, anti-puncture sole HRO, heat-resistant sole.

Additional information

sizes

39, 40, 41, 42, 43, 44, 45

Bota hertz giasco

70,00 $

Zapato bajo, en piel gamuzada espesor 1,8-2,0 mm. Con tejido exterior 3D, transpirable y resistente a la abrasión. Calzado con inserción en tejido reflectante. Lengüeta suave, forrada y alcochillada. CALZADO SIN PARTES METALICAS

Description

Características 

  • PUNTERA 200J composite a base de polímeros atérmico EN 12568
  • PLANTILLA ANTIPERFORACION tejido AISLANTE composite antiperforación flexible EN 12568
  • SUELA HARD ROCK AISLANTE doble densidad poliuretano y CAUCHO AISLANTE resistente a la hidrólisis ISO 5423:92, a los hidrocarburos y a la abrasión, anti-shock y anti-deslizante SRC
  • La parte inferior del zapato dentro de ciertos límites (sin humedad, no se refiere a la parte superior) ofrece aislamiento eléctrico contra tensiones hasta 1000V- M Ω > 1.000
  • Resistencia eléctrica: norma canadiense CSA Z195 – 14 incremento 1 kV/sec voltaje 20.000V /60 hz – duración 1 minuto.
  • Resistencia eléctrica ASTM F2413 -11 incremento 1 kV/sec voltaje 20000 V/60 Hz – duración 1 minuto.
  • Requisito de flujo eléctrico inferior de 1,0 mA.
  • PLANTILLA DIELECTRIC extraíble, anatómica, absorbente, aislante y transpirable FO resistencia de la suela a los hidrocarburos absorción de energía en la zona del talón P resistencia de la suela a la perforación HRO resistencia de la suela en contacto con el calor

Additional information

sizes

39, 40, 41, 42, 43, 44, 45